| Rockler Ogee Reversible Rail & Stile Bit | | Make perfect professional looking cabinet doors every time. Use this cutter to
make square edge or arch pattern doors without a fence. One bit cuts both
the rail and stile profiles; simply remove the heads and reverse the positions.
Available in chamfer, traditional, or classical styles. 1-5/8" diameter, 15/16"
cutter length, 1/2" shank, 1-1/2" shank length, 22mm bearing. Rockler Ogee Reversible Rail & Stile Bit |  |
|
| Freud 99-760 Premier Adjustable Rail and Stile Bit Set | | Create “rattle-free” flat panel doors and mill tenons of any length with these
quarter round bits. Works for any door 5/8" to 1-1/4" thick. Unique cutter
geometry virtually eliminates tearout. Adjustable shims enable a tight fit
when using plywood and also allow use with thick panels. Remove the top
portion of the cutter (including bearing and spindle) to produce the front of
the long tenon profile for blind tenons, through tenons or bridle joints.
High-density carbide composition and Perma-Shield coating lengthen bit life
and protect against heat and pitch build-up. 1/2" shanks. Freud 99-760 Premier Adjustable Rail and Stile Bit Set |  |
|
| Traditional Stile and Rail Router Bit Set | | Stile and rail bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware. This is a non-adjustable type of set, which means easier set-up, but can't be used for glass doors, and you must adjust the thickness of the panel to fit the fixed size of the groove. Traditional Stile and Rail Router Bit Set |  |
|
| Freud 97-158, 3-Piece Door Set | | Set contains Premier Adjustable Quarter Round Rail and Stile Bits to mill
tenons of any length! Simply remove the top portion of the cutter (including
bearing and spindle) to produce the front of the long tenon profile for blind
tenons, through tenons or bridle joints. These precise bits work for any door
5/8" to 1-1/4" thick. Unique cutter geometry virtually eliminates tearout.
Adjustable shims enable a tight fit when using plywood and also allow use
with thick panels from 7/32" to 1/4" thick. High-density carbide composition
and Perma-Shield® coating lengthen bit life and protect against heat and
pitch build-up. 1/2" shanks. Also includes a 3-1/2" dia. Cove Raised Panel
Bit with back cutter. Freud 97-158, 3-Piece Door Set |  |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
See More Stile and Rail bits at Rockler
|
See More Stile and Rail bits at Woodcraft
|
See more Stile and Rail Bits at Amazon
|
