Black & Decker 9" benchtop band saw
Inexpensive alternative for the very small shop. Weighs about 40 lbs. so you can easily put it away. Table tilts 45o, includes miter gauge, 2 year warranty. Depth of cut 3-3/4". 1/3hp.
|
 
|
|
Rockwell 9" benchtop band saw
The Rockwell offering in benchtops. Lightweight, less than 20 lbs. 3-1/8" depth of cut. 2.5 amp motor. Includes miter gauge and work light.
|
 
|
|
| Jet JWBS-10OS, 10'' Band Saw w/ Stand | | Good choice if space is at a premium in your shop. Has quick release blade tension, upper and lower ball bearing blade guides, an extra large cast iron tilting table, and an easily adjustible LED worklight. Heavy Duty 1/2 HP induction motor, 3 Year Warranty
Jet JWBS-10OS, 10'' Band Saw w/ Stand |  |
|
| JET - WBS-14OS BANDSAW W/OPEN STAND | |
3/4hp motor is totally enclosed and fan-cooled for long life.
Prewired for easy setup. Graphite impregnated polymer "JET Blocks" in the blade guides
for a cooler running blade. 16" x 16" cast iron work table. Built-in dust chute. 6" cutting capacity with 12-1/2" blade to
frame capacity.
JET - WBS-14OS BANDSAW W/OPEN STAND |  |
|
| DELTA 28-276 14" Band Saw with 3/4HP Motor & Open Stand | |
3/4hp, 14" saw with quick release tension lever, 4" dust collection port, blade and belt guards, 16" square cast iron tilting table. Cuts stock 6" thick, or 12" with height attachment. Blade guides are bearings and fully adjustable.
DELTA 28-276 14" Band Saw with 3/4HP Motor & Open Stand |  |
|
| DELTA 28-206 14" Band Saw with 1HP Motor & Enclosed Stand | |
1 hp model with the enclosed stand. Quick release tension lever, 2-speed pulley position, 4" dust collection port, blade and belt guards, 16" square cast iron table, 6" cut or 12" with extension. Fully-adjustable upper and lower blade guides and blade support. Bearings maintain proper blade alignment.
DELTA 28-206 14" Band Saw with 1HP Motor & Enclosed Stand |  |
|
Rikon 14" Deluxe 1-1/2hp Bandsaw
13" resaw capacity, 2 speeds, hinged blade guard makes blade changes easy, quick release blade tension, 16" x 20" cast iron table, hinged doors to access cast iron wheels, work light included, heavy duty fence with resaw bar, 4" dust port, 2 year warranty.
|
 
|
|
Rikon 18" 2-1/2 HP Bandsaw
2 speeds, 220V, 2-1/2hp, 12" resaw height, 19" x 21" table, blade guard is hinged making blade changes easy, quick release blade tension lever, cast iron wheels, ball bearing blade guides, 2 dust ports, 2 year warranty.
|
|
|
|
|
| JET - JWBS-14CS, 14'' Clsd Stand Bndsw, 1HP, 1Ph, 115/230V | |
1 hp 14" closed stand model. Closed stand is one-piece welded requiring no assembly. Motor enclosed and fan cooled. Pre-wired for easy setup. Graphite blade guides. 15" square cast iron table. Built in dust chute. 6" cut capacity. 2 year warranty.
JET - JWBS-14CS, 14'' Clsd Stand Bndsw, 1HP, 1Ph, 115/230V |  |
|
| Jet JWBS-14DXPRO, 14'' Deluxe Pro Bandsaw Kit | |
1-1/4 hp 14" 'deluxe' closed stand model (shown here with optional fence). Riser block included for 12" cut height capacity. Newly designed stronger frame. Ball bearing guides. Dust chute included. Blade guide post with rack and pinion adjustment. 2 Speed belt drive system. 5 year warranty.
Jet JWBS-14DXPRO, 14'' Deluxe Pro Bandsaw Kit |  |
|
| POWERMATIC - PWBS-14CS, POW 14'' WW Bandsaw w. stand (2Pc) | |
1-1/2 hp 14" closed stand model. Halogen lamp built into body. Chip blower blows away dust as you cut. 15" square cast table extends to 20" wide. Dual bearing blade guide system above and below the table. Built in 4" dust port. Rigid one-piece welded stand requires no assembly. Rip fence with resaw assembly included.
POWERMATIC - PWBS-14CS, POW 14'' WW Bandsaw w. stand (2Pc) |  |
|
| Powermatic 2415 24'' Bandsaw, 3HP, 1PH, 230V | |
3 hp 24" single phase 230v model. Rack and pinion table tilt system. Foot brake. Upper and lower ball bearing guides. Rack and pinion adjustable blade guide post. Rip fence and adjustable T-Slot miter gauge included. Cast iron drive wheels give momentum to cut. Lower wheel brush and 4" dust collection port.
Powermatic 2415 24'' Bandsaw, 3HP, 1PH, 230V |  |
|
| Jet JWBS-18QT, 18'' Bandsaw with Quick Tension, 1-3/4HP | | Triangular design frame provides superior column rigidity. 12-1/4' Resaw capacity. 19' x 19' precision ground cast iron table. 4' dust port. Precision balanced wheels eliminate vibration. Quick release blade tensioning with two settings for convenience. Upper and lower ball bearing, micro-adjustable blade guides. All cast iron handwheels. 5 Year Warranty.
Jet JWBS-18QT, 18'' Bandsaw with Quick Tension, 1-3/4HP |  |
|
| Jet JWBS-20QT-5, 20'' Bandsaw with Quick Tension, 5HP, 1Ph | | If you plan to cut a lot of thick stock, higher horsepower is the way to go. Triangular design provides superior column rigidity. 12-1/4' Resaw capacity. 21' x 21' precision ground cast iron table. 2 Speed V-belt drive. Precision balanced wheels eliminate vibration. Foot brake for rapid stops. Upper and lower ball bearing, micro-adjustable blade guides. All cast iron handwheels. 4' dust port. 5 Year Warranty
Jet JWBS-20QT-5, 20'' Bandsaw with Quick Tension, 5HP, 1Ph |  |
|
|
|
| Carter Band Saw Guides | |
These high quality all ball bearing replacement guides for your bandsaw will greatly increase the accuracy of cut. Very helpful for doing accurate resaw. Fits Delta or Jet bandsaws.
Carter Band Saw Guides |  |
|
| Kreg Precision Band Saw Fence | |
Very rigid, accurate fence made from aluminum extrusions, designed by band saw expert Mark Duginske. Includes special resaw attachment, as well as micro-adjustment screw device for making minute changes.
Kreg Precision Band Saw Fence |  |
|
| Olson® Cool Blocks® for Band Saw | | Improve your band saw performance with these blade guide blocks which allow blades to run cooler, quieter and last
longer.
Four guide blocks per set.
Made from non-metallic composite material.
Made in USA. Olson® Cool Blocks® for Band Saw |  |
|
| Ceramic Guide Blocks | |
These guide blocks are made of aluminum oxide, the same material used to make ceramic products for NASA. They create far less friction to provide a cooler running blade and truer tracking. You’ll get guide block seat tolerance of +/-.005. Outlasts every other guideblock on the market. These blocks will only fit 14'' Delta or Jet Band-Saws. Ceramic Guide Blocks |  |
|
| Band Saw Riser Blocks | |
These heavy cast iron spacer blocks mount between the two major castings of your 14" Delta or Jet bandsaw, thus increasing the height of cut from 6"to 12". Necessary for resawing wide boards.
Band Saw Riser Blocks |  |
|
| Rockler Band Saw Table and Fence | | Rockler partnered with Bandsaw expert and author Mark Duginske on this new, exclusive Bandsaw Accessory Table. Large table makes big work easier to cut. Has a circle cutting setup, fence and optional resaw attachment.
Rockler Band Saw Table and Fence |  |
|
|
|
|
|
|
|
|
|
